919924193400 919924193400

Twitter

EnglishFrenchGermanItalianPortugueseSpanish
Patel Kenwood Pvt. Ltd.



How To Stain Laminated Particle Board

Posted by Admin on November, 02, 2011

Particle Board is used to make various types of furniture or kitchen cabinets. Particle Board is also an inexpensive material that is made using recycled wood scrap. These Particle Boards are laminated to make them durable as well as decorative. Stain Lamination offers a beautiful makeover to the Particle Board and helps in retaining a new look over the years.

To stain the laminated Particle Board in a similar way the Particle Board Manufacturers do, there are certain instructions to be followed that can simplify the task of staining.

  1. At first, remove any type of hardware such as hinges, knobs or handles from the Particle Board.
  2. Laminate surface is to be wiped down to remove residue before staining with a degreaser. The instructions on the cleaner should also be followed for proper application.
  3. In the next step, the lamination has to be made rough so that the stains set on the Particle Board easily. For making the surface rough, medium-grit sandpaper is used. After sanding, vacuum cleaner can be used to clean the area.
  4. By following the instructions for application and curing, fill the holes in the particle board using wood filler. Once it dries, again sand it down to create a flush surface.
  5. Using a roller or brush, apply the primer coating twice. Keep it in open air for drying before staining it.
  6. Use a rag dipped in stain to wipe across the wood. Clean it using a clean towel by following the instructions or directions on stain. The stain should be applied evenly, avoiding the uneven and dark spots.
  7. Once the stain dries, apply a thin even coat by spraying or rolling of the polyurethane sealer. Let the wooden Particle Board dry overnight and allow the sealer to cure.

Staining on Particle Boards can be done at home as well but to save time and to get more perfection, it is feasible to obtain them from various Particle Boards Manufacturers or Suppliers. The buyers can search through various online portals and customized websites of Manufacturers to find themselves a suitable deal.

<< Previous Post Next Post >>

This entry was posted on November, 02, 2011 at 10 : 31 am and is filed under Particle Boards. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required)
(required) (will not be published)